Sonos Design & Installation, Auckland

Sonos is designed to be easy to set up yourself. You plug in the speaker, connect a soundbar to the TV with the included HDMI cable, and finish in the Sonos app — often in minutes.

That ease is real. What is easy to miss is how many different ways there are to design and install the same system. Speaker placement, which products you choose, how rooms are grouped, and whether anything is built into the wall or ceiling can make a Sonos setup extremely functional — or leave you with equipment you do not need, cables you can see, and a cabinet you bought just to hide the gear.

We start with how you actually live in the house. Then we specify the right products, in the right places, so the system works hard without waste of equipment or additional cabinetry. If you want it installed, our own staff do the work. We do not use subcontractors.

Book a consultation

How we design a Sonos system

A good Sonos system is usually simpler than people expect, not larger.

  1. We listen first. How you watch TV, where you play music, which rooms matter every day, and whether you already have speakers you want to keep.
  2. We look at the space. That can be a visit to your home, or a conversation at our Rosedale showroom with photos or a plan of the rooms.
  3. We check the practicalities. Wi-Fi coverage, power points, the TV’s HDMI ARC or eARC socket, and where cabling can be hidden rather than run across a wall or skirting.
  4. We specify only what the rooms need. A well-placed soundbar and subwoofer often does more for a TV room than a cluster of extra boxes. An open-plan kitchen and living area may share a zone. A hallway rarely needs its own speaker if the neighbouring rooms are grouped sensibly.
  5. We choose how it should sit in the room. Wall-mount the soundbar, tuck a Sub 4 under the sofa or beside a wall, use in-wall or in-ceiling speakers where a box would get in the way, or drive speakers you already own with a Sonos Amp.
  6. We plan the app the same way we plan the rooms. In the Sonos app, rooms can play together or independently. Grouping them well is part of the design, not an afterthought.
  7. We tune it once it is in place. Trueplay measures how sound reflects off walls, furnishings and other surfaces, then fine-tunes the speakers for that room and that placement.

You will always know what we are recommending and why, including what we are leaving out on purpose.

Common setups

These are typical starting points, not fixed packages. The right mix depends on the rooms, the TV, and how you listen.

A TV room with Arc Ultra and a Sub

A common living-room starting point is Sonos Arc Ultra on the wall, or on the TV stand, with a Sonos Sub 4 placed where it actually fits.

Arc Ultra is a Dolby Atmos soundbar. Setup is meant to be straightforward: plug in the power cable, connect the TV with the included HDMI cable, and finish in the Sonos app. You can keep using your TV remote. Speech Enhancement is there if you want clearer dialogue.

Sub 4 connects over Wi-Fi, so it does not have to sit next to the TV. Officially, you can stand it upright or lay it on its side and hide it under the sofa, and Trueplay can still tune the bass — including when the sub sits next to a wall. That is often the difference between a clean room and an extra piece of furniture.

If you later want full Dolby Atmos surround, a pair of Era 300 speakers can be added as rears. You do not have to buy the surrounds on day one if the soundbar and sub already do the job.

Whole-home multi-room

Once one room is right, other rooms can join the same system. Era 100 or Era 300 speakers in the rooms you actually use, plus the TV room, are enough for a lot of houses.

In the Sonos app you can group rooms so the same music follows you, or leave them independent when one person is watching TV and another is in the kitchen. The design job is to put speakers where they will be used, and to group rooms in a way that feels natural — not to put a speaker in every doorway.

Outdoor and in-ceiling

Where a box on a shelf would be in the way, we look at Sonos Architectural speakers, designed and tuned with Sonance, powered by a Sonos Amp.

  • In-ceiling and in-wall speakers sit in the plasterboard, with low-profile grilles that can be painted to match the room. They are a clean way to get music into a kitchen, bathroom, hallway or living area without a cabinet or a speaker on the bench.
  • Outdoor speakers by Sonos and Sonance are built for weather, and mount on FastMount brackets. Amp lives indoors; the speaker cable is run once, properly.

For gardens, pools and larger outdoor areas, we also use two Sonance landscape options, each powered by a Sonos Amp so the outdoor zone sits in the same app as the rest of the house:

  • Sonance RK83 rock speakers look like garden rocks and blend into planting and landscaping, in a granite or brown finish. Each one has an 8-inch woofer for warm, full bass, and they are rated IPX4 against UV, heat, wind, rain and pool splash. Their wide coverage means only a few are needed to fill a large area with sound, and the cable is buried rather than run along fences or walls.
  • Sonance Patio Series is a complete outdoor 4.1 system: four slim, earth-toned satellite speakers on ground stakes, plus an 8-inch subwoofer buried in the ground with only its top showing. It is designed for even, comfortable sound across areas up to about 93 m², which suits a patio, fire pit or spa area. The enclosures are non-corroding and IP66 rated, and the system can be expanded to eight satellites and two subwoofers for bigger spaces.

Both put the sound into the garden instead of onto the side of the house, so you can enjoy music outside without it being loud at the back door or bothering the neighbours.

A single Amp can power up to three pairs of Sonos Architectural speakers, but those pairs share one stream and one volume level. That is useful in a large open area. It is wasteful, or frustrating, if you put the kitchen and the deck on the same Amp and then want independent volume. We design the zones first, then decide how many Amps you actually need.

When Amp is powering matching Sonos In-Wall or In-Ceiling speakers, the app can apply Sonos’s architectural tuning and, with an iOS device, Trueplay.

Invisible speakers for rooms where you don't want to see a speaker

Some rooms simply look better with no speaker grilles at all: a formal lounge, a bedroom, a feature ceiling, or a space with a strong architectural look. For these zones we use Sonance Invisible Series speakers. We install a lot of them.

They are built into the wall or ceiling, then plastered over and painted with the rest of the surface, so once the room is finished there is nothing to see. Sonance designs them to spread sound widely, around 180 degrees, so placement is far less fussy than with a normal speaker. They can be positioned around lights, beams and services without compromising the look. They can also sit behind wallpaper, wood veneer and selected plaster finishes.

We connect them to a Sonos Amp, so those rooms become part of the same Sonos system. You still get the same app, grouping and music services as every other room. Because they disappear into the room, there is no speaker on show and no cabinet needed to hide one.

Invisible speakers are best planned early. They suit new builds and renovations, or a room that is being re-plastered and painted anyway, because the finish over the speaker needs to be done properly by the same trades doing the walls.

Upgrading existing speakers with Amp

If you already have good bookshelf, floor-standing, in-wall or in-ceiling speakers, you may not need a new set of boxes. Amp is made to power passive speakers (125 watts per channel into 8 ohms), connect to the TV over HDMI ARC, and take a line-in from a source such as a CD player or a turntable with a preamp.

From there, the same system can grow with Sonos speakers in other rooms. We will check whether your existing speakers are a good match for Amp, and we will not talk you into replacing them if they still do the job.

What you avoid

Good design is often about what you do not buy.

  • Extra speakers you do not need. A neighbouring zone, a better-placed pair, or a soundbar and sub in the right positions will often outperform a pile of leftover products.
  • A bulky cabinet for the equipment. A wall-mounted soundbar, an Amp tucked into an existing cupboard, in-wall or in-ceiling speakers, and a Sub 4 under the sofa are how you keep the room looking like a living room.
  • Visible cables. Wireless Sonos products still need power, and Amp and architectural speakers need a planned cable run. The aim is to hide or dress that cabling, not to pretend there is none.
  • Rooms that fight each other. If two spaces should be independent, they should not share an Amp. If they should play as one, you should not pay for a second zone.

Installed by our own staff

When you want the system installed, our own staff do the work. We do not use subcontractors.

That includes planning the cable route, wall-mounting a soundbar, cutting in architectural speakers where the walls or ceiling allow, setting up Amp, grouping rooms in the app, and running Trueplay once everything is in its final place. We also show you how to use the system day to day.

If you would rather set the wireless products up yourself, that is still a valid way to use Sonos. We can help with the design and leave the last steps to you.

Visit the Rosedale showroom

Come and see and hear Sonos at our showroom, preferably by appointment.

The Sound Store
1/43 Apollo Drive, Rosedale, Auckland 0632
Monday–Friday, 10am–3pm, preferably by appointment
Phone: 09 520 2105
Email: sales@thesoundstore.nz

Book a consultation

Frequently asked questions

Isn’t Sonos a DIY system? Why would I use you for design or installation?

Yes. Sonos is designed so you can set it up yourself, often in minutes, with the app. The value of design is in choosing the right products and placing them well — so the system is extremely functional without wasted equipment or extra cabinetry. Installation is there if you want in-wall or in-ceiling speakers, hidden cabling, a wall-mounted soundbar, or a whole-home layout done for you. Our own staff do that work.

Will I end up buying more than I need?

That is what we are trying to avoid. We would rather specify fewer products in the right places than fill every room on principle. If a speaker, a second subwoofer, or a second Amp will not earn its keep, we will say so.

I already have speakers. Can you use those?

Often, yes. Sonos Amp is made to power existing passive speakers and can also connect to your TV and to sources such as a turntable (with a preamp) or CD player. We will check compatibility before recommending anything new.

Can the speakers be hidden so I don’t need extra cabinets?

Yes, where the building allows it. In-wall and in-ceiling speakers by Sonos and Sonance sit in the wall or ceiling, and for rooms where you don't want to see a speaker at all, Sonance Invisible Series speakers are plastered and painted over so they disappear completely. Outdoor speakers mount on brackets, Sonance rock speakers sit in the garden like stones, and the Sonance Patio Series hides its subwoofer in the ground. Arc Ultra has a near-invisible official wall mount. Sub 4 can stand upright or lie on its side under the sofa. Amp can usually live in an existing cupboard, with the cabling planned in.

Do you use subcontractors to install Sonos?

No. Our own staff design and install the system. We do not use subcontractors.

Can I hear it first, and how do I book?

Yes. Visit the showroom at 1/43 Apollo Drive, Rosedale, Auckland 0632, Monday–Friday 10am–3pm, preferably by appointment. Book a consultation on our contact page, call 09 520 2105, or email sales@thesoundstore.nz. Sonos is sold in store and by enquiry only.

Book a consultation

Tell us how you use the rooms, and we will help you design a Sonos system that does more with less.

Book a consultation

Or call 09 520 2105 / email sales@thesoundstore.nz.