KEF
KEF CI5120QLM-THX
KEF CI5120QLM-THX
KEF Ci5120QLM-THX
Ci5120QLM-THX x 1 Metal grille x 1 Cutout template x 1 Warranty booklet Manual
Installing in-wall speakers can be a rewarding project if you're handy. Here are the top-line steps to guide you through the process:
Choose the location: Select where you want to install your speakers. You can either use an existing stud wall or framing, or build out from the existing wall to create the required space for the speakers. Use the cutout template: Most in-wall speakers come with a cutout template. Use this to mark the area on the wall where you'll cut. Cut the opening: Carefully cut along the marked lines to create the opening for the speaker. Run the wiring: Run speaker wire from your audio source to the cutout location. Install the speaker: Connect the speaker to the wiring and secure it in place according to the manufacturer's instructions. Finish Up: Once installed, you can paint or finish the wall around the speaker for a seamless look.
Key features & technologies
- Uni-Q® driver array
- KEF's point-source array for wide, even dispersion.
- UTB™ Ultra Thin Bezel
- Slim visible rim for discreet installation.
- THX certified
- See model badge (Ultra/Dominus) on the official page / spec sheet.
- Metamaterial Absorption Technology (MAT™)
- Absorbs unwanted rear tweeter sound for purer highs (where fitted).
What's in the box
- Ci5120QLM
- THX x 1
- Metal grille x 1
- Cutout template x 1
- Warranty booklet
- Manual
Specifications
| Nominal impedance | 4Ω |
|---|---|
| Sensitivity | 89dB |
| Crossover frequency | 440Hz, 2.75kHz |
| Frequency response | Range |
| Drive units | LF: 4 x 120mm (4.75 in.) MF: 100mm (4 in.) Uni-Q HF: 19mm (0.75 in.) vented aluminium dome with Metamaterial Absorption Technology 1 |
| Recommended amplifier power | 25 - 250 W |
| External dimensions | 818 mm x 186 mm x 96 mm (32.2 in. x 7.3 in. x 3.8 in.) |
| Cut-out dimensions | 795 mm x 163 mm (31.3 in. x 6.4 in.) |
| Mounting depth from surface | 90mm (3.6") |
| Net weight | 9.7KG (21.4 lbs.) |
Ideal room / use
Custom installation — verify cut-out, mounting depth and rear volume on the official KEF drawing before cutting.
Pairing suggestions
- Matching KEF Ci models for multi-channel systems
- Official rough-in frame where listed
- KEF subwoofer / KASA500 as applicable
Official resources
Product page · Ci group specification sheet (PDF)
Specifications sourced from KEF. KEF reserves the right to amend specifications. E&OE.
Share
